Dec. 26, 2022
Automobiles & Motorcycles
Stop Start, also known as Idle Stop Start (ISS), is a technology which is common in modern vehicles. Stop Start is a fuel saving technology which reduces a vehicle’s fuel consumption & emissions by switching the engine off while the vehicle is stopped. This innovative technology is beneficial for the planet and the wallet. Here’s your guide to understanding the technology behind Stop Start systems and Stop Start batteries:
Modern vehicles with Stop Start systems can detect when the vehicle is not moving and subsequently shut down the engine in order to reduce greenhouse gas emissions and fuel consumption. These features of Stop Start technology are particularly beneficial for those instances where the vehicle is stopped traffic lights, as it eliminated the unnecessary idling of the engine while waiting for a green light. In the same scenario, the engine in vehicles without Stop Start technology would continue to idle, wasting fuel and emitting pollution.
Vehicles with Stop Start systems require a Stop Start battery. Conventional batteries are not suitable for such vehicles and attempting to use one would not only cause premature battery failure. Stop Start batteries are specially designed to handle the constant cycling and frequent high power bursts which are characteristic of Stop Start systems. When the engine is switched, the battery will continue to power all electrical components including the headlights, radio, air conditioner and wipers and will also then deliver the power to start the engine again when required.
Vehicles with Stop Start systems require 5 to 10 times more engine starts when compared to their conventional counterparts. This puts a lot of strain on the vehicle’s battery. In addition to this, the battery is constantly charging and discharging while supporting the vehicle electrical loads when the engine is stopped. This is why a powerful Stop Start battery is needed. There are two different types of batteries for vehicles with Stop Start systems - Enhanced Flooded Battery (EFB) and Absorbent Glass Mat (AGM) battery.
So far, Camel products are exported to Europe, America, Africa, Southeast Asia and other countries and regions.
All Comments ( 0 )
When it comes to driving, safety is of utmost importance. This is why vehicles are equipped with various safety features, including brakes. Brakes play a critical role in ensuring that a vehicle comes to a stop quickly and safely.
The ball joint is a crucial component in a vehicle's suspension system that connects the steering knuckle to the control arm. It allows for the smooth movement of the wheel assembly and helps to support the weight of the vehicle. The ball joint is designed to withstand the stress and pressure of everyday use, but it is still subject to wear and tear over time.
Oil seal and O-ring are two common sealing components used in various industrial applications. While they may look similar at first glance, they are designed to serve different purposes and have distinct features. In this article, we will discuss the differences between oil seals and O-rings and when to use them.
Brake pads are widely used on motorcycles, trucks, bicycles, railways and various industrial clamps. They are an important part of the braking system of all kinds of vehicles equipped with drum or disc brakes, so that the brake disc of the exercising or moving machinery or car touches the brake pads and reduces the speed, thus making the wheels or machinery stop running and achieving the effect of braking. A brake pad is a steel support plate with a friction material on the side facing the drum brake or disc.
When debris gets stuck in the engine fork seals, it keeps them open and lets the oil slip away, and your vehicle's performance suffers. And an oil seal (also called a shaft seal or dirt seal) is a device used to prevent dirt, dust, water, or any other foreign material from contaminating the shafts and bearings in rotating shaft equipment. It stops the leakage of lubricant (e.g. oil) along the rotating shaft. In this article, we will introduce the basic knowledge you need to know when using oil seals.
If you are interested in sending in a Guest Blogger Submission,welcome to write for us!